Certification Mark webpage
The AW Test Mark consists of four elements placed in proximity and shall appear on Listed products only. The four elements of the mark are:
- The word “LISTED”,
- The Certification Mark logo,
- A control number to identify the manufacturer, assigned by AW Test Inc.,
- The product Identity.
The following is an example.
LISTED
(XXXX)
Load Insulating Link
Where XXXX = The control number assigned by AW Test Inc. –
The minimum height of the registered trademark symbol ® shall be 3/64 of an inch (1.19 mm).
The overall dimension of the AW Test Mark is a minimum of 3/8 of an inch (9.53 mm) height and may be of any color that contrasts with the color of the product.
The product identity is: “LOAD INSULATING LINK” or “TAG LINE INSULATING LINK.”
The product identity may appear elsewhere on the product when the other three elements are directly and permanently applied to the product by stamping, molding, ink-stamping, silk screening or similar process.
The manufacturer may reproduce the Mark on a suitable (for the substrate material it is adhered) label/nameplate or obtain the label/nameplate from an AW Test authorized supplier. The list of AW Test authorized label suppliers can be supplied from AW Test.